1. Norge
  2. Alle 3M-produkter
  3. Filtration
  4. Filter Cartridges & Media
  5. Pleated Membrane Cartridges
  6. 3M™ LifeASSURE™ BDA Series Filter Cartridge, BDA020F02BA, 20 in, 0.2 μ, 6/Case

3M™ LifeASSURE™ BDA Series Filter Cartridge, BDA020F02BA, 20 in, 0.2 μ, 6/Case

3M ID 7000050939
  • Multi-zone, microporous Nylon 6,6 membrane filtration, available in 0.2 to 0.8 micron range for protection of final membrane filter cartridges
  • Asymmetric dual-layer polyether sulfone membrane provides exceptionally high capacity and service life to help maximize economy
  • 100% Integrity tested in manufacturing and in situ for proper installation and operation
  • All materials are CFR 21 listed and are compliant with Regulation (EC) 1935/2004 to ease regulatory concerns
 Mer...
Se alle detaljer
Spesifikasjoner
Avslutt endring
226 O-Rings & Spear, Code 7
Bransjer
Industriell
Filtertype
Platemembran
Maksimal driftstemperatur (Celsius)
85 Degree Celsius
Mirkonrate
0,2 μm
Pakning/O-rings materiale
Silikon
Plissertype
Avansert foldeteknologi (APT)
Produktserier
BDA
Produkttype
Patron
Serie
LifeASSURE™ BDA Series
Total lengde (Metrisk)
50,8 cm
Produktdetaljer

We designed the 3M™ LifeASSURE™ BDA Series Filter Cartridge to help bottled water and other beverage processors meet the highest standards for microorganism control. Combined with the 3M range of particle control and prefiltration filter cartridges, these cartridges offer bottlers a solution for rigorous contaminant control while maintaining long service life and low operating costs.

We designed the 3M™ LifeASSURE™ BDA Series Filter Cartridge to help bottled water and other beverage processors meet the highest standards for microorganism control. Combined with the 3M range of particle control and prefiltration filter cartridges, these cartridges offer bottlers a solution for rigorous contaminant control while maintaining long service life and low operating costs.

Durable Design
The 3M™ LifeASSURE™ BDA Series filter membrane and cartridge design innovations result in a highly durable filter cartridge, capable of secure operation through numerous cycles of hot water sanitation, steam sterilization, and chemical based cleaning and sanitation.

Highly Asymmetric BDA Membrane
3M™ LifeASSURE™ BDA Series filters incorporate a novel dual-layer membrane with a high degree of asymmetry. When viewed in cross-section, the membrane contains larger pores on the upstream surface that gradually taper to smaller pores towards the downstream surface. Compared with conventional membranes with a symmetric pore structure, this structure provides greater contaminant capacity, since it presents greater open spaces (void volume) in which to retain these contaminants. This increase in capacity leads directly to longer service life. In addition, the asymmetric structure provides less resistance to flow, resulting in a lower pressure drop when compared at a constant flow rate to competitive filters, allowing a user to employ fewer 3M™ LifeASSURE™ BDA series filters for any given flow rate.

Advanced Pleat Technology Design
3M™ LifeASSURE™ BDA Series filters feature Advanced Pleat Technology (APT) design for extended service life. This design technology helps to maximize the useful surface area of the filter while maintaining open flow paths between the media pleats. By employing the APT design, the 3M™ LifeASSURE BDA Series filter provides lower pressure drops, longer service life, and lower overall operational costs.

Novel Media Support Design
3M™ LifeASSURE™ BDA Series filter cartridges employ a design that results in higher beverage flow versus pressure drop compared with competitive filters. This 3M Purification development combines the high flowing 3M™ LifeASSURE™ BDA series filter membrane with special support layers upstream and downstream of the membrane. When combined with the previously mentioned APT, this feature greatly increases flow per cartridge, and results in lower overall operational costs.

  • Multi-zone, microporous Nylon 6,6 membrane filtration, available in 0.2 to 0.8 micron range for protection of final membrane filter cartridges
  • Asymmetric dual-layer polyether sulfone membrane provides exceptionally high capacity and service life to help maximize economy
  • 100% Integrity tested in manufacturing and in situ for proper installation and operation
  • All materials are CFR 21 listed and are compliant with Regulation (EC) 1935/2004 to ease regulatory concerns
Kontakt 3M

Send oss en melding

Takk for din henvendelse til 3M. Informasjonen du oppgir i denne sammenheng vil bli brukt til å svare på din henvendelse, via mail eller telefon, fra en 3M representant eller en av våre autoriserte samarbeidspartnere som vi eventuelt deler personlig informasjon med, iht retningslinjer i 3M Personvernerklæring.

  •  
  •  
  •  
  •  
  •  
  • 3M takes your privacy seriously. 3M and its authorized third parties will use the information you provided in accordance with our Privacy Policy to send you communications which may include promotions, product information and service offers. Please be aware that this information may be stored on a server located in the U.S. If you do not consent to this use of your personal information, please do not use this system.

  • Send meldingen

Takk for at du kontakter 3M.

Vi har mottatt meldingen din, og undersøker nå din forespørsel
Én av våre representanter vil ta kontakt med deg på telefon eller e-post

An error occurred.